Lincoln Electric IM906 LN-10 (Bench Model) - Manual (Page 27)

TABLE C.1 – DRIVE ROLL AND GUIDE TUBE KITS
Wire Size
4-Rolll
DH Drive
(4-Driven)
Solid Steel Electrode
0.025” (0.6 mm) KP1505 - 030S
0.030” (0.8 mm) KP1505 - 030S
0.035” (0.9 mm) KP1505 - 035S
0.040” (1.0 mm) KP1505 - 040S
0.040” (1.0 mm) KP1505 - 045S
0.045” (1.2 mm) KP1505 - 045S
0.052” (1.4 mm) KP1505 - 052S
1/16” (1.6 mm) KP1505 - 1/16S
5/64” (2.0 mm) KP1505-5/64
3/32” (2.4 mm) KP1505-3/32
Cored Electrode
0.030 (0.8 mm) KP1505 - 035C
0.035” (0.9 mm) KP1505 - 035C
0.040” (1.0 mm) KP1505 - 045C
0.045” (1.2 mm) KP1505 - 045C
0.052” (1.4 mm) KP1505 - 052C
1/16” (1.6 mm) KP1505 - 1/16C
0.068” - 0.072” (1.7 - 1.8 mm) KP1505 - 068
5/64” (2.0 mm) KP1505 - 5/64
3/32” (2.4 mm) KP1505 - 3/32
7/64” Lincore Hard Facing (2.8mm) KP1505 - 7/64H
7/64” (2.8mm) KP1505 - 7/64
.120” (3.0mm) KP1505 - 120
Aluminum Electrode
0.035” (0.9 mm) KP1507 - 035A
0.040” (1.0 mm) KP1507 - 040A
3/64” (1.2 mm) KP1507 - 3/64A
1/16” (1.6 mm) KP1507 - 1/16A
Aluminum Electrode
(For use with Binzel Guns Only)
0.040” (1.0 mm) ---------------
3/64” (1.2 mm) ---------------
1/16” (1.6 mm) ---------------
C-1 ACCESSORIES C-1
LN-10