Acoustic Research XMC90 - Manual (Page 3)

MODEL XMC90 OWNER’S MANUAL
VERSION V 0.0 Page 3 of 20
2.0
Unit Description
2.1 Power On/Off Button ( )
When this button is pressed, power is applied to the radio circuits from the standby mode, and the unit enters into the
play mode (XM/FM/AM/AUX/iPod). When pressed again during any play mode, power is removed from the radio circuits
and the unit reverts to the standby mode. The default play mode is XM.
(Standby Mode) (Play Mode)
2.2 SNOOZE/Mute Button
When pressed during normal play mode (XM/FM/AM/AUX/iPod), the audio output is muted or disabled as indicated by
the speaker icon in the upper right corner of the display screen. When pressed again, the mute function is canceled and
audio is restored. While the alarm is active, press this button to enter the snooze mode.
2.3 DIRECT Button (Preset)
During normal operation, direct selection of the radio frequency in the XM, FM or AM radio modes is possible. To change FM or
AM frequency, use the CH Up/Down buttons or directly enter desired frequency using the number (1-10) buttons. To search radio
frequencies in FM/AM modes, press the CAT Up/Down buttons. In XM mode, the CAT Up/Down buttons provide a jump to the
various broadcast categories or genres. When the DIRECT button is pressed, Direct (DIR) disappears on the display, and is
replaced with preset bank A, B or C. Each bank is capable of storing up to 10 radio frequencies in memory. The frequency is stored
by pressing the corresponding number buttons (1-10) for 3 seconds, thus permitting memory storage of 30 frequencies. When this
button is pressed and held, the list of stored frequencies in the current band can be viewed. Press the CH Up or Down buttons to
scroll through the preset channel list.
Press this button to enter into
play mode from standby mode
Press this button to return
to standby mode from any
play mode
Press this button to mute
play mode audio
Press this button again to
cancel the mute function