Lincoln Electric IM567 K963 Hand Amptrol - Manual (Page 4)

NOTE: SINCE THE FULL OUTPUT OF THE CUR-
RENT SETTING IS AVAILABLE WHEN THE
AMPTROL IS FULLY EXTENDED, CARE
MUST BE TAKEN NOT TO SET A CURRENT
WHICH WILL EXCEED THE CURRENT CAR-
RYING CAPACITY OF THE TUNGSTEN.
WHEN IN DOUBT, USE A LOWER CURRENT
SETTING FIRST, THEN INCREASE.
TO AVOID BEING STARTLED BY A HIGH FREQUEN-
CY SHOCK, KEEP THE TIG TORCH AND CABLES IN
GOOD CONDITION.
- +
POWER SOURCE
6-PIN
PLUG
ELECTRODE LEAD
WORK SENSE LEAD *
*
}
{
BYPASS
CAPACITOR
KIT
*
{
HI-FREQ KIT
INPUT POWER *
5-PIN
PLUG
K915-1
AMPTROL
ADAPTER
GROUND
LEAD
6-SOCKET
RECEPTACLE
K963 HAND
AMPTROL
* SEE INSTRUCTIONS INCLUDED WITH HI-FREQ
KIT FOR CONNECTION INFORMATION.
K799 HI-FREQ KIT
Figure 2- Ground Lead Installation with a K915-1 Adapter
WIRING DIAGRAM
WARNING
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
Copyright © Lincoln Global Inc.
M20516
B
RED
BLACK
ORANGE
WHITE
GREEN
12 PIN
CONNECTOR
A
B
C
D E
F
G
H
J
K
L
M