Lincoln Electric IM505 IDEALARC CV-250 - Manual (Page 31)

F-4 DIAGRAMS F-4
CV-250
CV POWER SOURCE TO A K867 / K775 / LN-7
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.C. INSULATE EACH UNUSED LEAD INDIVIDUALLY.
SPARE
82 81 42 41 31 32
2 4
21
GND
75 76 77
31 32
2 4
21
GND
N.C.
K291 OR K404 INPUT CABLE
K775 OPTIONAL REMOTE CONTROL
K867 UNIVERSAL ADAPTER PLUG
75 76 77
GREEN
N.D.
Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box
WARNING
Turn off input power to the Welding Power Source
Before connecting the wire feeder.
ELECTRIC
SHOCK
CAN KILL
LN-7 WIRE FEEDER
N.D. SPLICE LEADS AND INSULATE. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF",
ELECTRODE CABLE
-
+
14 PIN AMPHENOL
POWER SOURCE
CV/CV-I
TO WORK
REVERSE ELECTRODE AND WORK CABLES AT POWER SOURCE.
6-18-93 S20659