beautypg.com

Installation – Lincoln Electric IM709 Demo Zone K1854-1 User Manual

Page 8

background image

A-1

INSTALLATION

DEMO ZONE

A-1

TECHNICAL SPECIFICATIONS - Demo Zone (K-1854-1)

Voltage Specification

Input Connection

Specification

230 VAC single phase, 40 amps

Type 6-50P plug

ELECTRICAL INPUT REQUIREMENTS

RATED OUTPUT

HEIGHT WIDTH

DEPTH

WEIGHT

53.00 in.

66.00 in.

53.00 in.

1707 lbs. (w/o gas cylinders)

2467 lbs. (with gas cylinders)

1346.2 mm

1676.4 mm

1346.2 mm

774.3 kg. (w/o gas cylinders)

1119.0 kg. (with gas cylinders)

The Demo Zone is intended for display and demonstration use. It is intended for light duty operation.
The Demo Zone operator must observe the 40 amp input current limitation. Because of the input power
limitation, power sources (except Ranger 250) when used at maximum output must be operated at low
duty cycles. Refer to Welder Operation - Duty Cycle section of this manual.

PHYSICAL DIMENSIONS