American Power Conversion 8000VA - Manual (Page 12)

10
N OTE : S ETTINGS ARE MADE THROUGH SUPPLIED P OWER C HUTE SOFTWARE , N ETWORK M ANAGEMENT CARD ,
OPTIONAL S MART S LOT ACCESSORY CARDS OR T ERMINAL M ODE .
F UNCTION
F ACTORY
D EFAULT
U SER S ELECTABLE
C HOICES
D ESCRIPTION
High Bypass Point
+10% of
output voltage
setting +5%, +10%, +15%,
+20% Maximum voltage that the UPS
will pass to connected
equipment during internal
bypass operation.
Low Bypass Point -30% of output
voltage setting -15%, -20%, -25%, -30% Minimum voltage that the UPS
will pass to connected
equipment during internal
bypass operation.
Output Voltage XLJ models:
200 VAC
XLT models:
208 VAC
XLTW models:
220 VAC
XLI models:
230 VAC XLJ models:
200 VAC
XLT models:
200, 208, 220, 230,
240 VAC
XLTW models:
200, 208, 230, 240 VAC
XLI models:
200, 208, 220, 230,
240 VAC
*Use the voltage setting
applicable to your region. Allows the user to select the
UPS output voltage while
on-line.
Output Frequency Automatic
(50 ± 3 Hz or
60 ± 3 Hz) 50 ± 3 Hz
50 ± 0.1 Hz
60 ± 3 Hz
60 ± 0.1 Hz Sets the allowable UPS output
frequency. Whenever possible,
the output frequency tracks the
input frequency.
Number of Battery
Packs 1 Number of Connected
Batteries (four battery
modules per pack) Defines the number of
connected battery packs for
proper runtime prediction.