Johnson Level & Tool Mfg. 40-6687 - Manual (Page 11)

©2012 Johnson Level & Tool 11
Pulse Mode Button
When the horizontal laser line, vertical laser line, or both laser lines
are on, press the pulse button and the laser line will enter Pulse
Mode and the corresponding LED will flash. Press the pulse
button again and the laser will exit the pulse mode, and the
corresponding LED will return to solid.
Note:
1. When the laser lines are off, the pulse mode button will not
function.
2. Pulse mode is for use with a detector.
Laser Line Control Button
Press the line button to turn the laser line
on or off. Unlock the laser and press the line
button once. The horizontal laser line
LED will be on and the output of the laser is
as follows:
Press the line button a second time, the
horizontal laser line LED will be off, the vertical
LED will be on, and the output of the laser is
as follows:
Horizontal Line
Vertical Line
6339H_Manuals 10/24/12 12:56 PM Page 11