Johnson Level & Tool Mfg. 40-6690 User Manual

Page 15

This symbol means the laser is level and is in its idea accuracy
and working status.

If the LCD symbol does not flash, it means the ride side of laser is
high but still in the allowed range.

If the LCD symbol flashes, it means the right side of laser is
beyond the allowed range and the right side needs to be lowered.

Battery symbol
With the laser powered on, check the battery capacity symbol to note
the power status on the LCD display.

Full battery, no need to charge

Low battery, laser can be used

No power, battery pack needs to be recharged or new
alkline batteries must be installed

Remote function
Included with the pipe laser is a remote control. The keypad function
of the remote control is the same as the pipe laser, except the power
button .

• Press the power button on the remote when pipe laser is turned on

and the pipe laser will enter the sleep mode. The pipe laser saves
the current data and powers down.

4429H-English_Manuals 2/18/11 9:40 AM Page 15