Johnson Level & Tool Mfg. 1455-0000 - Manual (Page 4)

4 ©2014 Johnson Level & Tool - Rev. 1
Battery Installation
1. Make sure the digital level is turned off.
2. Open the battery compartment. Remove the old batteries and install
2 “AAA” alkaline batteries.
3. Close the battery compartment.
Notes:
1. Be sure to match up polarities when installing 2 “AAA” batteries.
2. Always remove the batteries before storing the instrument.
“Erro” Reading
An error reading on the LCD indicates the level is tilted too far forward or
backward to display an accurate reading. Position the level flat on its
intended read surface.
4. Operating Instructions
IMPORTANT: It is the responsibility of the user to verify
the calibration of the instrument before each use.