Elitegroup G733G - Manual (Page 65)

Slide the compartment cover into place and be sure the screw holes on the cover align completely
with the screw holes in the case.
Secure the cover with the two screws.
CPU Upgrade
To upgrade your CPU, follow the procedures below:
Turn the notebook over so that the rear ports are facing you.
Locate for the expansion compartment.
Unscrew and remove the cover of the CPU compartment.
Remove all the screws attached to the heatsink.
Before removing the screws, there are certain measures to followed in removing the heatsink.
To remove the heatsink, first loosen the screw carefully.
After loosening one screw, be certain that the next to be loosen should be the screw on its adjacent
side as shown on the illustration.
Be sure to loosen all the screws first before removing it totally to release
the heatsink. Failure to do so will cause a major damage to the heatsink.
Now you can totally remove all the screws also in that order when you first loosen the screw.
55