AT&T 1187 - Manual (Page 9)

7
Getting Started
Handset assembly & charging
After installation, place the handset in the charger for at least 15 hours before use. You
can keep the battery charged by returning the handset to the charger after each use.
When battery power is fully depleted, a full recharge takes about 8 hours.
Plug in battery here.
Low battery indicator
Return handset to charger when this
symbol appears. (Handset will beep
when battery is low.)
NEW 00 OLD 27
0 8/12 10:06 AM
Press coin into slot on
base of handset to
release latch, then
remove cover.
Place handset in charger for
15 hours before first use.
To replace cover:
Insert top tabs first.
Press down to
click in place.
Plug power adapter into jack on
underside of charger as shown,
then plug into electrical outlet.
1 2
91-5783-10-00_ATT1487_R0.qxd 6/2/2003 12:14 PM Page 7