Davey PoolSweepa Wallclima/Optima Pool Cleaners - Manual (Page 12)

PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions 10
7. PoweR SUPPlY - FoR oPTIMa MoDel
Full filter bag indicator and Reset button
The power supply is equipped with a filter bag status indicator.
The red LED indicates two filter conditions.
• When blinking - The filter is partially blocked.
• When lighted - The filter is blocked and must be emptied and cleaned.
If the LED does not turn off after the filter bag had been emptied and cleaned, press the RESET button
while the robot is working.
weekly Timer
Your robotic pool cleaner's power supply has a unique timer control.
This allows you the possibility to set an automatic cleaning schedule for the week ahead.
When the power supply is switched on, the 3 LEDs will blink for 5 seconds. At this time by pressing the
SELECT button you may choose a pool cleaning schedule for the coming week.
Note: The robot will always begin to work upon set-up.
leD 1 - The robot will automatically work every day for a full cycle = 7 times a week.
leD 2 - The robot will automatically work every other day for a full cycle = 4 times a week.
leD 3 - The robot will automatically work every 3 days = 3 times a week.
If you do not press any of the buttons n the first 5 seconds after the power supply has been switched
on the robot will work for one cycle only.
While the robot is working in Weekly Timer mode the LED will blink constantly between cycles.
At the end of the week the power supply automatically switches off.
You must reschedule the robot.
• Input – 100-250 AC Volts
• 50-60 Hertz
• 180 Watt
• Output – <30 VDC
• IP 54
Digital “Switch-Mode” Power Supply with Weekly Timer and full Filter Bag indicator.
ON / Off switch
Full Filter Bag Indicator LED 1 LED 2 LED 3