Operating instructions, Poolsweepa floorcova pool cleaner, Introduction – Davey PoolSweepa FloorCova Pool Cleaner User Manual
Page 4: Specifications, Warnings and cautions
PoolSweepa FloorCova Pool Cleaner | Operating Instructions
2
PoolSweepa FloorCova Pool Cleaner
Operating Instructions
1. INTRODUCTION
Thank you for purchasing a PoolSweepa FloorCova Pool Cleaner.
We are sure that your PoolSweepa FloorCova Robotic Pool Cleaner will provide you with reliable,
convenient and cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface
climbing brush enhance maximum pool hygiene.
The Robotic Pool Cleaner PoolSweepa FloorCova deliver advanced cleaning technologys, long
lasting performance and easy maintenance.
2. SPECIFICATIONS
Motor protection: IP 68
Minimum depth: 0.80m
Maximum depth: 5m
3. WARNINGS AND CAUTIONS
3.1. Warnings
•
Use the originally supplied power supply only
•
Ensure the electrical outlet is protected by a ground fault interrupter (GFI) or an earth
leakage interrupter (ELI)
•
Keep the power supply out of standing water
•
Position the power supply at least 3m away from the edge of the pool
•
Do not enter the pool while the pool cleaner is working
•
Unplug the power supply before servicing
3.2. Cautions
When not in use store the Pool Cleaner upsidedown in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine
Max 4 ppm
pH
7.0 - 7.8
Temperature
6 – 34°C
NaCl
Maximum = 5000 ppm
• Input - 100-250 AC Volts
• 50-60 Hertz
• 180 Watt
• Output - <30 VDC
• IP 54
Digital “Switch-Mode” Power Supply
Power Supply