Orion-2c pneumatic pressure controller – Condec Orion-2C User Manual
Page 2

© CONDEC 2001 • All rights reserved • Printed in the United States of America • Specifications subject to change without notice
March 2001
63246
Page 2
ORION-2C Pneumatic Pressure Controller
Part #55283, Patent No. 4.698.998
INSTALLATION:
Panel or bracket mounting:
1. Turn the two outside knobs clockwise.
2. Remove all (three) knobs.
3. Install controller into recommended
hole pattern with two
10-32 x 1/2" lg. screws.
4. Install knobs, align set
screws with both
dimples on knob inserts
and shaft.
2.80
1.75
PRESSURE
VALVE
#10-32 UNF-2B
(2) PLACES
FITTING LOCATION
INLET PORT
MS33649-02 THREAD
MATING FITTING, PN 59716
1.82
VENT VALVE
FITTING LOCATION
VENT PORT
MS33649-02 THREAD
MATING FITTING, PN 59716
Model No. Orion 2C
Serial No.
Pressure: 0-3000 psi
Proof Pressure: 3500 psi
Patent No. 4.698.998
TEST PORT#2
MS33649-04 THREAD
6.90
RETAINER PLATE ASSY,
PN 56424
REMOVE AT TIME OF
PANEL MOUNTING
TEST PORT#1
MS33649-02
MATING FITTING, PN 59716 THREAD
VERNIER
2.70
STOP WASHER
LOCK NUT
KNOB INSERT
KNOB
SETSCREW #6-32
5.80
1.53
1.450
2.900
1.450
1.350
Ø .213
(2) PLACES
(2) PLACES
RECECOMMENDED HOLE PATTERN FOR ORION 2