Alpine CDA-7892 - Manual (Page 19)

17
-EN
Adjusting Display Contrast
(CDA-7995 only)
You can adjust the display contrast for better visibility.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select
“CONTRAST.”
3
Turn the Rotary encoder to adjust the contrast of the
display. You can adjust in a range of -6 and +6.
The initial setting at the factory is "0."
4
Press the SETUP button to set the selected mode.
Demonstration
This unit has a Demonstration feature which simulates the
display functions.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select the
DEMO mode.
3
Press the BAND button to turn on or off the DEMO
mode.
Each press toggles between DEMO ON and DEMO
OFF.
If no button is pressed for 30 seconds, the DEMO
mode activates.
NOTES
• The initial setting at the factory is “DEMO OFF.”
• To quit DEMO mode, set to “DEMO OFF.”
4
Press the SETUP button again to return to normal
operation.