ReadyLIFT Ford Raptor 2010-2014 - Rear Hydraulic Bump Stop Kit User Manual
Page 6
www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 25-2000
6
Center the bracket.
25.
Torque all the hardware that you installed to spec.
26.
Insert flag nut into the frame 3rd toward rear of vehicle and align with the bolt
hole. Thread in bolt and lightly tighten.
21.
Slide the long flag nut into the frame towards rear of the vehicle.
22.
Align with the hole and insert the bolt.
23.
Again loosely tighten.
24.
Install hydraulic bump can into sleeve.
27.
Line up the allen head bolt on the hydraulic bump can to the opening
on top of the sleeve. The bolt head will fit into the hole.
28.