beautypg.com

ReadyLIFT Ford Raptor 2010-2014 - Rear Hydraulic Bump Stop Kit User Manual

Page 4

background image

www.ReadyLIFT.com - Phone: (800) 549-4620

Installation Instructions 25-2000

4

Install under axle bracket and hardware.

9.

Torque down.

10.

Remove u-bolts.

5.

Place the strike pad on the axle and leaf pack, underneath the u-bolts.

6.

Re-install the u-bolt plate and hardware.

7.

Insert provided bolts into the strike pad over the axle.

8.

One completed side. Repeat steps for other side of vehicle.

11.

Remove stock bump stop from vehicle at frame.

12.

See also other documents in the category ReadyLIFT For the car: