ReadyLIFT Jeep JK Wrangler, 2007-UP 4 Max Flex Lift Kit" - Manual (Page 5)

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-6407
5
Unbolt the passenger side upper arm and install the new arm. You may need
to flex the exhaust to remove the upper arm bolt. Tighten the upper
arms on both sides. Then reinstall the bolts for the exhaust. 17.
Unbolt and remove the both L & R lower arms from the vehicle.
Support the differential to prevent axle roll. 18.
Install the new front lower arm on both sides of vehicle and tighten.
The adjustable end should be mounted at the axle and the bend should
Point to the center of the vehicle also badges should be legible.
19. Center, mark and drill 7/16 hole. 20.
Install the new arm into frame and onto axle, then tighten down. You may need to
un-bolt the passenger side to fit the Driver side arm due to length differences
from stock arm to ReadyLIFT® arm. 15.
On passengers side, unbolt the header from the exhaust.
Use some type of thread lubricant to help free rusted exhaust.
16.
Unbolt drivers side front upper arm from the frame. 14. Unbolt drivers side front upper arm at the axle. 13.