Bill of materials – ReadyLIFT Jeep JK Wrangler, 2007-UP 4 Max Flex Lift Kit" User Manual
Page 3

www.ReadyLIFT.com - Phone: (800) 549-4620
Installation Instructions 49-6407
3
All hardware is of the highest grade and the components are manufactured to exacting specifications for a trouble free installation.
Bill of Materials
Read all instructions first.
1.
Lift the vehicle and remove the tires.
Support the axles
.
2.
With the vehicle properly supported locate the front track bar.
3.
Remove the track bar from the frame.
4.
DESCRIPTION
QTY
Short Arm Lower Front (L&R) w/Badges
2
Short Arm Upper Front
2
Short Arm Lower Rear (L&R) w/Badges
2
Short Arm Upper Rear (L&R)
2
Front Spring
2
Rear Spring
2
4" Front Bump Stop
2
4" Rear Bumpstop Bracket
2
Swaybar End Link, 10"
2
Swaybar End Link, 11"
2
Rear Sway Bar Drop Brackets
2
Rear Track Bar Drop Down Bracket Kit
1
Front Brake Lines - 35" (L&R)
2
JK Front Brake Line Bracket
2
JK Rear Brake Line Bracket
2
DESCRIPTION
QTY
JK Rear Brake Line Drop Bracket
1
Bolt, 1/2"- 13 x 1.25
2
Bolt, 1/2"-13 x 2.50
6
Bolt, 1/2-13 x 2.75
2
Bolt, M10-1.25x60mm
2
Bolt, M6-1.0x20mm
4
Bolt, M8-1.25x20mm
4
Nut, 1/2"-13 Nyloc
10
Nut, M10x1.5 Flange
2
Nut, M6-1.0
4
Nut, M8-1.25 Flange
4
Washer, 1/2" AN Style
16
Washer, 1/2" Flat
4
Washer, M6 Flat
8
Washer, M8 Flat
8
IMPORTANT
ReadyLIFT® Off Road Arms/Links come preset to
length but may need to be adjusted per application for
alignment reasons and/or to eliminate possible tire rub.
It is the installers responsibility to insure the correct
length shocks are installed and drive lines are smooth
and free of any binding. Note: This kit REQUIRES ad-
justable front and rear track bars. We recommend RL
part numbers; 77-6000 and 77-6001 or 77-6002 and
77-6003.