beautypg.com

Actiontec electronic DataLink V.90 PC Card Fax Modem PCMCIA User Manual

Page 16

background image

12

4 Installing the Driver Software

13

DataLink V.90 PCMCIA Fax Modem

Windows 95 OSR2

To load the Modem’s software drivers onto a computer running Windows 95 OSR2:

1. Turn on the computer.

2. Insert the Modem into the computer’s PCMCIA slot.

3. Windows detects the Modem, and the first “Update Device Driver Wizard”

window appears. Insert the DataLink Installation CD in the computer’s
CD-ROM drive and click Next.

4. Another “Update Device Driver” window appears. After Windows has

found the driver software for the Modem, click the Finish button.

5. If Windows asks for an installation disk, click OK, then Other Locations. Select

the CD-ROM drive and click OK again. The driver software is installed.

See also other documents in the category Actiontec electronic Hardware: