Av30mx-2, Av series, 3 operation – Stewart Audio AV30MX-2 User Manual
Page 7
12
13
3 Operation
3.1 Operating Precautions
1. Before use, your amplifier must be configure for proper operation,
including input and output wiring hookup. Improper wiring can re-
sult in damage to equipment or potentially harm to the operator.
Consult section 2 for setup instructions.
2. Tampering with the circuitry, or making unauthorized changes is
not only dangerous but may also violate local regulations.
3. Use care when making connections between the amplifier and the
input or output equipment. Using equipment that is not capable of
handling the output wattage may lead to permanent damage.
NOTE: Stewart Audio will not be held responsible for
damage to your AV30MX-2 or connected equipment if
the instructions in this manual are not followed.
3.2 Controls, Indicators, and Connectors
L Speaker R
Mute
Pwr
Level
1
ON
L CLIP R
SIG
Input 2
Input 1
UL 2043 Plenum Rated
R
L
Input 2
Input 1
+ -
+ -
- + - +
AV Series
AV30MX-2
1
2
3
4
5
8 9
10
10 11
11
6
7
1
2
3
Speaker Output Connector
Remote Mute
Power Connector
4
Channel 2 Level Knob
5
Channel 1 Level Knob
6
Channel 2 Input (RCA)
7
8
9
Channel 1 Input (3.5mm
Power Indicator LED
Clip Indicator LED (Left)
10
10
Clip Indicator LED (Right)
11
11
Signal Present Indicator LED