Stewart Audio AV30MX-2 - Manual (Page 5)

8 9
2.2.3 Product Dimensions
2.3 Proper Cooling Considerations
Because the AV30MX-2 regulates its temperature using convection
cooling and no fans, the amplifier must be given adequate space to
allow for proper airflow. Do not stack the amplifiers on top of each
other or mount it in a way that other equipment will block airflow
through the case.
CAUTION: Inadequate airflow to the amplifier can cause the
amplifier to overheat and potentially become damaged in
the process. Be sure to provide plenty of air space to allow
for convection cooling.
2.4 Input Connections
Your AV30MX-2 includes two independent stereo inputs which are
then mixed into the final output. Channel 1 will accept a stereo 3.5mm
jack while Channel 2 will accept stereo RCA phono plugs. Both inputs
should be stereo, unbalanced, and line-level. The AV30MX-2 does not
include a pre-amplifier. Refer to the next section on the proper wiring
for the 3.5mm and RCA inputs.
2.4.1 Input Connection Diagrams
AV Series AV30MX-2
4.35in
11.1cm
1.25in
3.2cm
1.25in
3.2cm
3.2in
8.1cm
Front
Side
+ Ground
(Shield)
+/Right
+/Left
Shield
Right
Left
+/Left
-/Right
Ground
(Shield)
+/Left
-/Right
Ground
(Shield)