AGFA ePhoto CL30 - Manual (Page 36)

ePhoto CL30 User’s Guide 37
Using the Camera with a Computer
Using the Serial Cable
To use the serial cable to connect the camera to your computer:
1. Plug one end of the serial cable (included) into the SERIAL port
on your camera.
2. Depending on your operating system:
Plug the other end of the cable into a serial port on
your computer.
Connect the other end of the cable to the Mac adapter
cable (included). Then plug the adapter into your
Mac’s printer or modem port.
Using the USB Cable
You can use the USB cable on a computer that has a USB port and
software support (see the table on page 36).
Before you can use the USB connection, you may need to
install the USB support from the PhotoWise CD. For
details, see USB Notes (shipped in the box with your camera).
PC Mode
When you connect the camera to a computer, slide the Mode switch
to PLAY or REC, and slide the LCD switch to PC.
Transferring Images into Your Computer
You can use PhotoWise to transfer images from the ePhoto CL30 to
your computer. See PhotoWise Tips or on-line help for details. As
you transfer images to the computer, the images taken with the
PhotoGenie resolution are enhanced to true 1440 x 1080 resolution.
CL30Int/Win/Mac Page 37 Tuesday, March 2, 1999 9:15 AM