MAHLE RTI RHS780 - Manual (Page 13)

December 9, 2002 Page 12
W E I G H T = X X . X L B
A U T O M A T I C ? 5
>>>>>
ENTER
W E I G H T = X X . X L B
S E T U P ? 5
ENTER
F I L T E R H O U R S =
X X . X H O U R S
>
T O T A L R E C Y C L E D =
X X X X . X K G
>
T O T A L C H A R G E D =
X X X X . X K G
>
Accessing Stored Data
1. Setup the RHS780 as shown on Page 4 and then turn the Main Power Switch (3)
ON.
2. Using the Keypad (2), press the “Up Arrow” key five times to display “WEIGHT=
XX.X LB” “SETUP? 5” and then press the ENTER key. The Display (6) will read
“FILTER HOURS=” “XX.X HOURS”.
See the Filter Maintenance section of the manual, Page 14, for the procedure to
change the filters. The normal Filter Change Interval is after every 25 hours.
Note: Press and hold the “Right Arrow” key and press the RESET key to remove
the “CHANGE FILTERS 5” message.
3. Press the “Up Arrow” key. The Display (6) will read “TOTAL RECYCLED=”
“XXXX.X KG”.
4. Press the “Up Arrow” key. The Display (6) will read “TOTAL CHARGED=”
“XXXX.X KG”.
5. Press the “Up Arrow” key to return to the Main Menu.