Actiontec electronic 56K V.90 User Manual

Page 11

Text mode
Original mode

Step 3

After the installer has copied the .INF files to the hard disk, another New
Hardware Found dialog box will appear prompting for the “Wave Device
for Voice Modem”. Click OK. (See “Do This First” for information on
UNIMODEM.INF if the following screen does not appear.)

Step 4

Click OK to copy the Wave Device .INF file from the CD-ROM Drive.

Step 5

To determine what COM port and IRQ is assigned to the modem in Win-
dows 95, click on the Modems icon in Control Panel and select the Diag-
nostic tab. Click the COM port icon next to the modem and then click
More Info to view the modem properties. Take note of the COM port and
IRQ—these will be needed when you configure your communications soft-
ware.