Hot and cold water connection – AEG 50420 User Manual
Page 44
Installation and Connection Instructions
44
Hot and Cold Water Connection
Washing machines with hot and cold fill should be connected as
shown below.
Important!
The incoming hot water temperature must not exceed 70 °C.
If only a cold water supply is available, connect the two hoses to the
cold water outlet by means of a Y connection piece.
(A Y piece is available from your AEG Service Force Centre,
part number 645.430.709.)
hot
hot
cold
See also other documents in the category AEG Washers:
- L87695WD (2 pages)
- L87695WD (40 pages)
- L98699FL (2 pages)
- L98699FL (32 pages)
- L61470WDBI (40 pages)
- L61470WDBI (2 pages)
- L61470WDBI (76 pages)
- L85275XFL (56 pages)
- L85275XFL (68 pages)
- L85275XFL (76 pages)
- L87485FL (2 pages)
- L88409FL2 (40 pages)
- L88409FL2 (36 pages)
- L76675FL (36 pages)
- L76675FL (2 pages)
- L61470BI (36 pages)
- L61470BI (40 pages)
- L60460FL (2 pages)
- L75470FL (36 pages)
- L75475FL (2 pages)
- L75270FL (36 pages)
- L61470BI (2 pages)
- L61470BI (32 pages)
- L75270FL (36 pages)
- L75270FL (36 pages)
- L75270FL (36 pages)
- SV4028 (98 pages)
- L 75475 FL (32 pages)
- KO-LAVAMAT 74335 (52 pages)
- L 75470 FL (36 pages)
- 73742 (40 pages)
- LAVAMAT W 857 (52 pages)
- L 60060 TL (32 pages)
- LAVAMAT 72630 (56 pages)
- KO-LAVAMAT 72620 (52 pages)
- LAVAMAT 88810 (48 pages)
- KO-LAVAMAT 72640 (56 pages)
- LAVAMAT W 1030 (44 pages)
- LAVAMAT 86741 (60 pages)
- LAVAMAT 14800 (26 pages)
- KO-LAVAMAT 70630 (56 pages)
- LAVAMAT W 1020 (44 pages)
- LAVAMAT 60810 (40 pages)
- LAVAMAT 50612 (36 pages)