AEG 50420 - Manual (Page 21)

Operating Instructions
21
Changing the Spin Speed or Selecting Rinse Hold
0
If desired, reduce the spin speed for the final spin
or select rinse hold:
– Press the spin speedbutton or
– Press the o (RINSE HOLD) button.
If o (RINSE HOLD) is selected, the washing is
left in the last rinse water, it is not spun.
3
If you do not reduce the spin speed, the final spin for all washing
programs is automatically performed at 850 revolutions per minute.
The speed for the intermediate spin is dependent on the program
selected and cannot be changed.
During the Washing Program
Program progress indicator
The program selector serves as a program progress indicator by rotating
in a clockwise direction to the end of the program. It is normal for the
rotation speed of the program selector to vary during the program.
Changing settings:
During the washing program you can:
– Change the spin speed
– Select o (RINSE HOLD)
– Change the temperature setting
Other settings cannot be altered.
Stopping the program early:
0
1. Press the M (ON/OFF) button.
2. Turn the program selector clockwise to v (PUMP OUT), position 6
(SPIN), or position 8 or 11 (SHORT SPIN).
3. Press the M (ON/OFF) button again.
The water is
– pumped out or
– pumped out and the washing then spun.