Loading the washing, Adding detergent/conditioner – AEG 50420 User Manual
Page 19
Operating Instructions
19
Loading the Washing
3
See "Program Tables" for maximum loads.
For information about the correct preparation of the washing see
"Washing Types and Care Symbols".
0
1. Sort and prepare washing according to type.
2. Open the door: pull the handle on the door.
3. Load the washing.
Important! Do not trap any washing when closing
the door! The fabrics and the machine could be
damaged!
4. Close the door firmly.
Adding Detergent/Conditioner
3
For instructions concerning detergents and conditioners see
"Detergents and Conditioners".
0
1. Pull out the detergent dispenser drawer as far as it will go.
2. Add detergent/conditioner.
k
Pre-wash detergent or stain
remover. Only for k (PRE WASH)
and position 1 (STAIN) program.
l
Main wash detergent in powder
form and water softening agent if
used (if you use a water softening
agent add the softening agent on
top of the main wash detergent.)
w
Liquid conditioners
(fabric softener, starch)
Important: Do not fill above the MAX mark. When using thick
concentrated fabric conditioners and starches we recommend you
dilute the concentrate with water to ensure trouble-free dispensing.
If using starch powder dissolve according to manufacturers
instructions.
3. Push the detergent dispenser drawer right in.
When using Liquid Detergents:
Add liquid detergent with dosing containers provided by the detergent
manufacturer. Observe instructions on detergent package.