Yokogawa 202 Field Mounting Rate Totalizer - Manual (Page 13)

3.1 PROGRAM STEPS
Step Comment
CAL 00 Pulse Output
0 = No pulse output, low and high alarms
1 = Scaled pulse output and low alarm
CAL 01 Span - whole numbers.
CAL 02 Span - digits after the decimal point.
The Span is the number of units of measure per
timebase (eg. litres/sec, Gal/min). The Span can be
programmed in the range of 0.000001 - 999,999.
See section 3.2.
CAL 03 Cutoff Point.
This determines the cutoff point as a fraction of Span.
See section 3.2.2.
CAL 04 Decimal Point for Rate Display.
The flowrate can be displayed with 0, 1, 2 or 3 decimal
point places.
CAL 05 Timebase for Rate.
The Rate can be displayed in units per second, minute,
hour or day.
0 = second
1 = minute
2 = hour
3 = day.
See section 3.2.
Programming 11