Yokogawa 202 Field Mounting Rate Totalizer - Manual (Page 10)

2. SPECIFICATION
General
Display: LCD, which is continuously powered.
Resettable Total: 7 digits with 10mm (0.4") high digits.
Resettable from front panel.
Accumulated Total: Displayed when the Accumulated Total button is
pressed.
Rate/Display: 5 digits with 8.5mm (0.33") high digits.
Span: The units of measure per timebase (eg. gallons/sec) is
programmable in the range 0.000001 to 999,999.
Decimal Points: Decimal Point positions are fully programmable for
both rate and total.
Timebase: Span can be programmed in units per second, minute,
hour or day.
Signal Type: 4-20mA.
4-20mA Input
Resolution and
Linearity:
0.05% of span.
Accuracy: 0.05% of span @ 25°C.
0.1% (typ) of span, full temperature range.
Update Time: 0.5 seconds.
Connection: Two wire.
Voltage Drop: 2.5 volts maximum.
8 Specification