Yokogawa AXFA11 Magnetic Flow Converter - Manual (Page 3)

IM 01E20C01-01E
1. INTRODUCTION
1.2 Warranty
• The terms of this instrument that are guaranteed are
described in the quotation. We will make any repairs
that may become necessary during the guaranteed
term free of charge.
• Please contact our sales office if this instrument
requires repair.
• If the instrument is faulty, contact us with concrete
details about the problem and the length of time it
has been faulty, and state the model and serial
number. We would appreciate the inclusion of
drawings or additional information.
• The results of our examination will determine
whether the meter will be repaired free of charge or
on an at-cost basis.
᭿ The guarantee will not apply in the following
cases:
• Damage due to negligence or insufficient mainte-
nance on the part of the customer.
• Problems or damage resulting from handling,
operation or storage that violates the intended use
and specifications.
• Problems that result from using or performing
maintenance on the instrument in a location that
does not comply with the installation location
specified by Yokogawa.
• Problems or damage resulting from repairs or
modifications not performed by Yokogawa or
someone authorized by Yokogawa.
• Problems or damage resulting from inappropriate
reinstallation after delivery.
• Problems or damage resulting from disasters such as
fires, earthquakes, storms, floods, or lightning strikes
and external causes.
᭿ Trademarks:
ADMAG, AXF and ADMAG AXF are registered
trademarks of Yokogawa Electric Corporation.
Company names and product names used in this
material are registered trademarks or trademarks of
their respective owners.
1.3 Combination Remote
Flowtubes
IMPORTANT
• The AXFA11 Magnetic Flowmeter Converter
should be used in combination with the follow-
ing remote flowtubes:
AXFA11G
⇔AXF002ٗ-N to AXF26Lٗ-N
Contact Yokogawa before using it in combina-
tion with flowtubes other than those listed
above.
• The model AXF
ٗٗٗC remote flowtube with
optional code JF3 (TIIS flame proof type)
cannot be combined with the AXFA11 con-
verter. In this case, use the AXFA14 converter.
• If the converter combined with the AXF mag-
netic flowmeter remote flowtube is changed
from the AXFA11 to AXFA14 or vice versa, the
meter factor of the remote flowtube must be
readjusted according to its flow calibration.
CAUTION
In case of combination with the explosion proof
type remote flowtube (AXF
ٗٗٗC-N) for
ATEX, FM, and CSA certification, please see the
manual IM 01E20D01-01E. The construction of
the instrument, installation, external wiring,
maintenance, and repair are strictly restricted,
and non-observance or negligence of these
restriction would result dangerous condition.
1-3