beautypg.com

Faucet functions maintenance & care – Pfister GT48-CB0Y User Manual

Page 4

background image

12

13

14

15

FAUCET FUNCTIONS

MAINTENANCE & CARE

CAUTION: Maintenance

DISASSEMBLY

1. Replacement parts may be available at the store where you purchased

your faucet.

2. When replacement parts are not available, please write or call Price

Pfi ster Consumer Service.

3. Always turn off water and relieve pressure before working on your

faucet.

NOTE: Trim Care

Cleaning Instructions:
For all Handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage. Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:

Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!

1–800–PFAUCET (1–800–732–8238)

For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfi ster.com

• Installation Support
• Care and Warranty Information

12 VALVE FUNCTION

COLD valve: close-counterclockwise, open-clockwise; HOT valve: close-clockwise,
open-counterclockwise.

Note: Flush faucet before turning on valve (see step 13).

13 FLUSHING & AERATOR CLEANING

After installation is complete, remove Aerator Housing (13A). Turn Valves (13B) on
and allow both hot and cold water to run for at least one minute each. While water is
running, check for leaks. To clean the aerator, disassemble Aerator Housing (13A) by
separating the Aerator Shell (13C), Basket (13D), and Washer (13E). Once parts have
been cleaned, reassemble by reversing steps.

14 HANDLE INSTALLATION REMOVAL

Turn off water before proceeding! With Valves in “Closed” position, unscrew Fastener
(14A) and remove Handle Hub (14B) from Valve Stem (14C).

15 VALVE CARTRIDGE MAINTENANCE

Turn off water supplies and relieve pressure before working on your faucet.
Remove handles (See Step 14), unscrew Cartridge Assembly (15A) and inspect.
Replace parts as necessary. Reassemble parts by reversing steps.

4

14A

14B

14C

13E

13D

13C

13A

13B

HOT

COLD

CLOSED

OPEN

CLOSED

OPEN

15A

This manual is related to the following products: