Pfister VSP-P10W - Manual (Page 3)

ENGLISH
ENGLISH
Carefully set the lavatory onto the pedestal so the lag bolt hole is aligned with the an-
choring hole in the wall. Secure lavatory to the wall with hanger bolt (7A). Complete the
water supply and drain connections according to the instructions of the manufacturer.
UNIT START UP
8
For more information about the installation or care
and warranty information, please contact your local
Black & Decker HHI representative in your country or
visit www.pricepfister.com/international.
8 UNIT START UP
Turn water supply, and check for leaks at all visible connections and verify that no water
is seeping from the sink as it fills with water. If leak is suspected, shut off supply valve
immediately until source of leak is located and secured.
7
3
8
7A