En g li sh – Pfister R15-407K User Manual

Page 3

ENGLISH

7 SPRAY HOSE INSTALLATION

From above deck, insert Decorative Hose (7A) through Spray Base Holder

(7B). From underneath deck, connect one end of Service Hose (7C) to Diverter

Outlet (7D).

Do not let Decorative Hose (7A) retract down into Spray Base Holder

(7B).

8 SPRAY HOSE CONNECTIONS

Attach Service Hose (8A) to the end of Decorative Hose (8B).

9 DIVERTER VALVE & SPOUT ADAPTER CONNECTION

Connect Diverter Tub Outlet (9A) to Spout Adapter (9B). Use either Price Pﬁster

15-136 Pipe Connect Kit (Supplied Separately) (½”-14 NPSM thread) (9C) or

solder ½” (13 mm) I.D. (⅝” (16 mm) O.D.) copper lines (cut to length).

For threaded ﬁttings, wrench tighten and use PTFE Plumber’s tape per

manufacturer’s instructions.

When using copper tubing, remove all internal parts from components

prior to soldering. Failure to do so can result in water damage.

10 DIVERTER VALVE & HANDLE VALVE CONNECTIONS

Connect Diverter Inlets (10A) to Handle Valve Outlets (10B). Use either Price

Pﬁster 15-136 Pipe Connect Kit (Supplied Separately) (½”-14 NPSM thread) or

solder ½” (13 mm) I.D. (⅝” (16 mm) O.D.) copper lines (cut to length).

For threaded ﬁttings, wrench tighten and use PTFE Plumber’s tape per

manufacturer’s instructions.

When using copper tubing, remove all internal parts from components

prior to soldering. Failure to do so can result in water damage.

Be sure all pipes are securely fastened to construction to prevent

vibration.

10A

10B