Pfister F-026-4TWS - Manual (Page 5)

ENGLISH
ENGLISH
19
16
15
17
18
20
FAUCET FUNCTIONS
15 WATER SUPPLY CONNECTIONS
Gently separate hot and cold Supply Tubes (15A), approximately three inches
apart. Connect water Supply Lines (15C) to Faucet Inlets (15B). Hot water
supply line goes to hot inlet fitting indicated by red tag (15D). (Supply lines not
included). Follow manufacturer’s instructions when installing supply lines.
16 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the
sink.
Note: After installation is complete, flush faucet (see step 21).
17 SPOUT FUNCTION
Spout (17A) can be rotated around the Faucet Body in any direction.
18 VALVE FUNCTION
By lifting Lever Handle (18A) up, the valve will be activated allowing water to
flow. The water flow will increase by continuing to lift up Lever Handle (18A).
By rotating Lever Handle (18A) counterclockwise, the water temperature will
decreased to fully cold. By rotating Lever Handle (18A) clockwise, the water
temperature will increased to fully hot.
19 SIDE SPRAY OPERATION
Side Spray (19A) can be pulled out to spray water in any direction. To activate
the Side Spray (19A), press Toggle Button (19B) located on the back of Side
Spray (19A).
20 SOAP DISPENSER OPERATION
To activate Soap Dispenser (20A), press Dispenser Head (20B) to dispense
liquid soap.
5
15A
15C 15C
15B
15D
15B
15A
HOT
COLD
18A 18A
19A
17A
20A
HOT COLD
ON
19B
20B