Pfister GT34-4PS0 - Manual (Page 6)

ENGLISH
ENGLISH
MAINTENANCE & CARE FAUCET FUNCTIONS
19
20
21
22
23
19 VALVE FUNCTION
By lifting the Lever Handle (19A) up, the valve will be activated allowing water to flow.
The water flow will increase by continuing to lift up the Lever Handle (19A). By rotating
the Lever Handle counter-clockwise, the water temperature will decrease to cold flow
only. By rotating the Lever Handle clockwise, the water temperature will increased to
hot flow only.
20 SPOUT FUNCTION
The Spout (20A) can be rotated around the Faucet Body in any direction.
22 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (22A). Turn Valve (22B) on
and allow both hot and cold water to run for at least one minute each. While water is
running, check for leaks. To clean the aerator, disassemble Aerator Housing (22A) by
separating the Aerator Shell (22C), Basket (22D), and Washer (22E). Once parts have
been cleaned, reassemble by reversing steps.
21 SIDE SPRAY OPERATION
The Side Spray (21A) can be pulled forward to spray water in any direction. To activate
the Side Spray, press the Toggle Button (21B) located on the back of the Side Spray
(21A). 23 HANDLE REMOVAL
Turn off water before proceeding! With valve in closed position, detach Decorative Button
(23A), unscrew Fastener (23B), and remove Handle Hub (23C) from Valve Stem (23D).
6
HOT
COLD
ON
19A
22A
22C
23A
23B
23C
23D
22D
22E
22B
20A
21A
21B
19A