Pfister GT529-MDS - Manual (Page 5)

ENGLISH
ENGLISH
17
21
22
18
19
20
23
MAINTENANCE & CARE
FAUCET FUNCTIONS
17 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
18 SPOUT FUNCTION
The Spout (18A) can be rotated around the Faucet Body in any direction.
19 VALVE FUNCTION
By rotating the Lever Handle (19A) away from the Faucet Body (19B), the valve will be
activated allowing water to flow. The water flow will increase by continuing to rotate the
Lever Handle (19A). By rotating the Lever Handle towards you, the water temperature
will decrease to cold flow only. By rotating the Lever Handle away from you, the water
temperature will increased to hot flow only.
Note: Flush faucet before turning on valve (see step 24).
20 PULL-OUT OPERATION
The Pull-Out Hose (20A) can be pulled forward to spray water in any direction.
21 SPRAY OPERATION
By activating the valve, water will flow in regular stream mode. To activate the spray
mode, press Button (21A) located behind Spray Head (21C). By pressing Button (21B),
the spray pattern will change between spray and stream while the faucet is in operation.
By holding Button (21B), the water flow will pause. The water flow will resume once
Button (21B) is released.
22 SOAP DISPENSER OPERATION
To activate Soap Dispenser (22A), press Dispenser Head (22B) to spray liquid soap.
23 SPRAY HEAD REMOVAL
To prevent damage to the internal parts of your faucet from debris that may have collected
in the water lines, it will be necessary to flush the faucet. Flushing requires the removal
of the sSpray Head (23A). To remove the Spray Head (23A), hold metal Hose Fitting
(23B) and turn the Spray Head (23A) counterclockwise.
5
21A
21B
21C
22B
22A
20A
18A
19A
23B
HOT COLD ON
19A
19B
23A