En g l is h english – Pfister GT529-TMS User Manual

Page 3

ENGLISH

ENGLISH

2 HOLE INSTALLATION

8 INSTALLING MOUNTING RING

Place Mounting Ring (8A) over Putty Ring (8B) and sink hole. Align Mounting Ring (8A)
to the center of sink hole. Place a bead of plumber’s putty in the bottom groove along
the outer edge of Putty Ring (8B).

9 BODY INSTALLATION

Retract Pullout Hose (

9A) up through Faucet Body (9B), until the pullout hose fi tting is

fl ush with the bottom of Mounting Shank (

9C). Insert Faucet Supply Tubes (9D) and

Mounting Shank (

9E) through the hole in Deckplate (9F) or Mounting Ring (9G). Handle

(9H) can be oriented to the right or the left.

Note: Do not feed the pullout Hose (9A) back down through the spout yet.

10 SECURING SPOUT BODY

From underneath sink, place Washer (10A) and Locknut (10B) over Pull-Out Hose (10C)
and Supply Tubes (10D). Thread loosely onto faucet shank (10E). Make sure that Handle
(10F) is properly aligned to sink. Tighten faucet fi rmly to sink.

11 QUICK CONNECT & WEIGHT ATTACHMENT

Insert the end of the Pull-Out Hose (11A) into the Weight (11B). Screw Quick Connector
(11C) to the free end of Pull-Out Hose (11A).

10A

11A

10B

10D

10C

10E

11B

11C

10F