English, Faucet installation – Pfister GT72-YP2K User Manual

Page 2

ENGLISH

ENGLISH

FAUCET INSTALLATION

Thank you for purchasing this Price Pﬁster product. All Price Pﬁster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).

1 BEFORE PROCEEDING

WARNING: Read all the instructions completely before proceeding. Price Pﬁster

recommends calling a professional if you are uncertain about installing this product!
This product should be installed in accordance with all local and state plumbing and
building codes.

2 SHUT OFF WATER SUPPLY

Locate water supply inlets and shut off the water supply valves. These are usually found
under the sink or near the water meter. If you are replacing an existing faucet, remove
the old faucet from the sink and clean the sink surface thoroughly.

3 TOOLS RECOMMENDED

• Plumber’s putty

• Slotted screwdriver • Phillips head screwdriver

• Pliers

• Adjustable wrench

• Flashlight

• Cloth

Your installation may require new supply lines and / or shut-off valves or other additional
tools.

4 CHECKING THE CONTENTS OF THE BOX

Upon opening the box, check to ensure that all of the following items are included.

A Spout Body

B Control Body

C Spout Seal Ring

D Spout Mounting Nut

E Square Washer

F Round Washer

G Control Body Mounting Nut

H Control Body Seal Ring

If any of these items are missing, please contact Price Pﬁster Consumer Service at
1-800-Pfaucet (1-800-732-8238).

5 SPOUT BODY INSTALLATION

Place a bead of plumber’s putty in the groove along the bottom outer edge of Seal Ring
(5A). Place Seal Ring (5A) under base of Spout Body (5B). From above sink, insert
Mounting Shank (5C) through side hole of sink.

6 SECURING SPOUT BODY

From underneath sink, place Square Washer (6A), and Mounting Nut (6B) onto Mounting
Shank (6C). Tighten faucet ﬁrmly to sink.

Caution: Do not over tighten!