Apple Multiple Scan 1705 Display (17-inch CRT) - Manual (Page 16)

Using more than one display
If your computer has expansion slots, you can use your Apple Multiple Scan
Display with one or more additional displays connected to your computer.
You may need a video card for each additional display you are using. See the
manuals that came with your computer for information on working with
additional displays
Connecting the display to your computer
Follow these steps to connect the display to your Macintosh computer:
IMPORTANT Before you connect any cords or cables, make sure that your
computer is turned off and unplugged.
1 Connect the socket end of the power cord to the power cord receptacle on the back of
the display.
WARNING If your display is equipped with a three-wire grounding
plug—a plug that has a third (grounding) pin—this plug will fit only a
grounded AC outlet. This is a safety feature. If you are unable to insert
the plug into the outlet, contact a licensed electrician to replace the
outlet with a properly grounded outlet. Do not defeat the purpose of the
grounding plug!
8 Chapter 1