Proface FP3900 - 19 Flat Panel" - Manual (Page 14)

• Tightening the screws with too much force can damage the FP unit's case.
• The necessary torque is 0.5N•m.
• Depending on the installation panel's thickness, etc., the number of installation
fasteners used may need to be increased provide the desired level of moisture
resistance.
• Installation fastener model number : GP070-AT01.
FP
Panel
„ „ „ „ „Attach the Installation Fasteners from Inside the Panel
The following figures show the four (4) fastener insertion slot locations. Insert each fastener's
hook into the slot. Tighten the screws in a diagonal pattern, and slowly increase the torque.
Unit: mm [in]
„ „ „ „ „Create a Panel Cut and insert the FP into the panel from the front
Panel
301.5 [11.87 ] +1
0 +0.04
0
227.5
[8
.9
6
]
+1 0
under 4-R3
FP
+0.04 0
Panel thickness
1.6mm[0.06in] to
10.0mm[0.39in]
Panel
FP
Installation
fastener
Top
Bottom
Insertion Slots