Fc8150, Features – Silicon Motion FC8150 User Manual

Page 7

Datasheet 7/60

FC8150

Terrestrial Integrated Services Digital Broadcasting (ISDB-T 1-seg)

RF tuner & Demodulator SoC

1.2. Features

Highly integrated digital device for ISDB-T

External specification

z Package

32-leads QFN (0.4mm pin pitches, 4.0mm X 4.0mm X 0.85mm)

48-balls fBGA (0.4mm ball pitches, 0.25mm ball diameter, 3.2mm X 3.2mm X 0.8mm）

34-balls WLCSP (0.35mm ball pitches, 0.1mm ball diameter, 2.3mm X 2.3mm X 0.35mm）

z Multi clock correspondence :

Support Clock(MHz): 16, 16.384, 18, 19.2, 24, 24.576, 26, 27, 27.12, 32, 37.4, 38.4 MHz

Recommended Clock(MHz) :16.384, 24.576, 26.0, 32.0

z Power supply voltage：1.14~1.32V（Core）/ 1.62 ~ 3.63V（I/O）/ 1.14 ~ 1.32V(RF,ADC)

z Power consumption: 31mW @ Core 1.2V

z High-speed channel search function

z Mode, GI automatic detection

z Automatic frequency synchronization function

z Automatic timing synchronization function

z Embedded memory for time de-interleave

z Enhanced channel estimator by using accurate Doppler frequency measurement

z ICI canceller for enhancing the mobility performance

z Enhanced interference rejection technique

z Advanced

demapper

z Complex low IF and digital PGA technology for simplified analog front-end path

z Sensitivity : -100 dBm @ QPSK CR=2/3

Interface

z Parallel

Host

Interface

9 3-bit control pins, 2-bit address bus and 8-bit data bus

9 3-bit control pins, 8-bit data bus, it is compatible with Qualcomm QSC/MSM series modem

chip.

z Serial Host Interface

9 SPI: Clock speed is up to Crystal Clock(max. 38.4MHz)

9 I2C : Clock speed is up to 1.2MHz for control

z MPEG-2 Serial-TS output

9 Various TS clock : Clock speed be controlled from Crystal clock to 1/7 of Crystal clock

z Interrupt signal output