Val-Matic Swing Check Valve - Manual (Page 11)

VAL-MATIC'S SWING CHECK VALVE
OPERATION, MAINTENANCE AND INSTALLATION
Page 11 of 13
keyways for installing at various
orientations.
4. Install weight (31) at the desired location.
5. Install nut (35), washer (36), and bolt (34)
on lever (30).
AIR CUSHION RE-ASSEMBLY
1.
Install weight and lever and cylinder bracket
(40), bolts (46) and washers (47).
2. Install Key (32).
3. Install bolt (46) and lever (45).
4. Install cylinder (42) with clevis pins (43 and
44).
PARTS AND SERVICE
Parts and service are available from your local
representative or the factory. Make note of the
valve Model No. and Working Pressure located on
the valve nameplate and contact:
Val-Matic Valve and Mfg. Corp.
905 Riverside Drive
Elmhurst, IL 60126
Phone: (630) 941-7600
Fax: (630) 941-8042
A sales representative will quote prices for parts or
arrange for service as needed.