Reelcraft Static Discharge Reels G3050 - Manual (Page 2)

Grounding Reels
Page 2 www.reelcraft.com
REGULAR MAINTENANCE
1. Reel is factory lubricated for life. No additional lubrication required.
2. Periodically check cable for wear. If wear is detected, cable should be replaced immediately. If cable replace-
ment is required, order cable assembly kit no. 5 which contains cable and related parts, hardware and instruc-
tions. See parts list for details.
SPRING REPLACEMENT
DO NOT attempt to remove spring motor from its canister. Doing so can result in damage to reel or
personal injury.
DANGER
Spring motors are self-contained for safe and easy handling. If spring motor replacement is required, it should be
replaced as a unit by ordering spring motor kit no. 1 which contains the spring motor, spool, shaft and bushings in
a sealed canister. See parts list for details.
RATCHET LOCK REPLACEMENT
For your convenience, the ratchet lock assembly has been included in two separate replacement kits. Order either
the hardware assembly kit no. 6, or the RH housing assembly kit no. 2. See parts list for details.
Item
Number
Part Number Description
1 G 3050-K01 Spring motor assembly: spring motor, shaft and bushings in sealed container
2 G 3050-K02 RH housing assembly: RH housing half, ratchet lock assembly (attached to housing)
3 G 3050-K03 LH housing assembly: LH housing half, nameplate
4 G 3050-K04 Cable guide
5 G 3050-K05 Cable assembly: cable, grounding clamp(s), lockwasher-M4, hex nut-m4 (see notes below)
6 G 3050-K06
Hardware package: spacer, torsion spring, slotted machine screws M4 x 14mm (3), slotted ma-
chine screws M4 x 8mm (6), lockwasher-M4 (10), hex nut-M4 (10), retaining ring (3), extension
spring, ratchet lock assembly
7 602413 Cable stop
CABLE OPTIONS
(Number 5)
“Y” cable assembly (two clips),
add -Y to the part number.
EXAMPLE: G 3050-K05-Y
Nylon covered cable, add -N to
the part number.
EXAMPLE: G 3050-K05-N
NOTE:
RH housing assembly (no. 2)
includes ratchet lock assembly
and ground shoe attached
to housing.
*For G 3050 Y models with “Y” cable (two grounding clamps), order part number G 3050-K05-Y.
For G 3050 N models with nylon covered cable, order part number G 3050-K05-N.