ALESIS QS6.2 - Manual (Page 75)

Editing Effects
11
73
Configuration 2: 2 REVERBS
This Configuration should be used when two different reverbs are
needed. For example, you might need a gated reverb for drums and a
regular reverb for everything else.
Send 1 is routed through a mono Delay, then a Chorus, then to the first
Reverb. Send 2 is routed directly to the first Reverb.
Send 3 is routed through a mono Chorus, then to the second Reverb.
Send 4 is routed directly to the second Reverb.
REVERB1
REVERB3
PITCH1
PITCH3
DELAY1 SEND1
SEND2
SEND3
SEND4
MAIN LEFT
MAIN RIGHT
Chrs In Lev
MAIN LEFT
MAIN RIGHT
MIX1 SECTION MIX3
RvbIn Send2
RvbIn Send4
Chrs In Lev
DelayIn Lev