Qualcraft Skyhook - Manual (Page 15)

Labels
G
ua
rd
ia
n
Fa
ll
Pr
ot
ec
tio
n
6
30
5
S.
2
31
st
S
t.
, K
en
t,
W
A
9
80
32
p
ho
ne
: (
80
0)
4
66
-6
38
5
f
ax
: (
80
0)
6
70
-7
89
2
w
w
w
.g
ua
rd
ia
nf
al
l.c
om
13
DO NO
T REM
O
VE LABELS
If equipmen
t f
ails inspection
IMMEDIA
TEL
Y REM
O
VE FR
O
M SERVICE
User must inspect prior to EACH use. Competent Person must complete
formal inspection every 6 months. Competent Person to inspect and initial.
INSPE
CTION GRID
Date of First Use: __________________. Product lifetime is indefinite as
long as equipment passes pre-use and Competent Person inspections.
YR J F M A M J J A S O N D
20____
20____
20____
20____
20____
Inspection Grid for all
Skyhook Anchors:
#00300: #00310:
#00320: #00330:
#00340: #00342:
For reference only. Background to be white.
Date of manufacture to be: month/year.
! WARNING
www.guardianfall.com 1-800-466-6385 6305 S. 231st St., Kent, WA 98032
Skyhook Anchor
Part #: 00300
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2004 regulations.
Prior to use, read and understand all instructions provided
with equipment at time of shipment from manufacturer.
Date of manufacture:
Materials: Powder-coated steel.
Capacity range: 130-310 lbs.
(including all equipment)
Structure must withstand MINIMUM load of 5,000 lbs.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
Avoid contact with sharp and abrasive edges and surfaces.
Avoid contact with all hazards, including, but not limited to,
electrical shock, corrosive substances, and excessive heat.
Compatible roof pitch:
flat.
Substrate strength requirements: Wood: 3/4” CDX plywood or better.
Metal: 20ga. or thicker. Concrete: 2000 p.s.i. minimum.
90045 (Rev. A)
! WARNING
www.guardianfall.com 1-800-466-6385 6305 St. 231st St., Kent, WA 98032
Skyhook Anchor
Part #: 00310
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2004 regulations.
Prior to use, read and understand all instructions provided
with equipment at time of shipment from manufacturer.
Structure must withstand MINIMUM load of 5,000 lbs.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
Avoid contact with sharp and abrasive edges and surfaces.
Avoid contact with all hazards, including, but not limited to,
electrical shock, corrosive substances, and excessive heat.
Compatible roof pitch:
1/12 - 3/12.
Substrate strength requirements: Wood: 3/4” CDX plywood or better.
Metal: 20ga. or thicker. Concrete: 2000 p.s.i. minimum.
Date of manufacture:
Materials: Powder-coated steel.
Capacity range: 130-310 lbs.
(including all equipment)
90046 (Rev. A)
! WARNING
www.guardianfall.com 1-800-466-6385 6305 S. 231st St., Kent, WA 98032
Skyhook Anchor
Part #: 00320
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2004 regulations.
Prior to use, read and understand all instructions provided
with equipment at time of shipment from manufacturer.
Structure must withstand MINIMUM load of 5,000 lbs.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
Avoid contact with sharp and abrasive edges and surfaces.
Avoid contact with all hazards, including, but not limited to,
electrical shock, corrosive substances, and excessive heat.
Compatible roof pitch:
4/12 - 6/12.
Substrate strength requirements: Wood: 3/4” CDX plywood or better.
Metal: 20ga. or thicker. Concrete: 2000 p.s.i. minimum.
Date of manufacture:
Materials: Powder-coated steel.
Capacity range: 130-310 lbs.
(including all equipment)
90047 (Rev. A)
! WARNING
www.guardianfall.com 1-800-466-6385 6305 S. 231st St., Kent, WA 98032
Skyhook Anchor
Part #: 00330
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2004 regulations.
Prior to use, read and understand all instructions provided
with equipment at time of shipment from manufacturer.
Structure must withstand MINIMUM load of 5,000 lbs.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
Avoid contact with sharp and abrasive edges and surfaces.
Avoid contact with all hazards, including, but not limited to,
electrical shock, corrosive substances, and excessive heat.
Compatible roof pitch:
7/12 - 9/12.
Substrate strength requirements: Wood: 3/4” CDX plywood or better.
Metal: 20ga. or thicker. Concrete: 2000 p.s.i. minimum.
Date of manufacture:
Materials: Powder-coated steel.
Capacity range: 130-310 lbs.
(including all equipment)
90048 (Rev. A)
! WARNING
www.guardianfall.com 1-800-466-6385 6305 S 231st St., Kent, WA 98032
Skyhook Anchor
Part #: 00340
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2004 regulations.
Prior to use, read and understand all instructions provided
with equipment at time of shipment from manufacturer.
Structure must withstand MINIMUM load of 5,000 lbs.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
Avoid contact with sharp and abrasive edges and surfaces.
Avoid contact with all hazards, including, but not limited to,
electrical shock, corrosive substances, and excessive heat.
Compatible roof pitch:
10/12 - 12/12.
Substrate strength requirements: Wood: 3/4” CDX plywood or better.
Metal: 20ga. or thicker. Concrete: 2000 p.s.i. minimum.
Date of manufacture:
Materials: Powder-coated steel.
Capacity range: 130-310 lbs.
(including all equipment)
90049 (Rev. A)
! WARNING
www.guardianfall.com 1-800-466-6385 6305 S 231st St., Kent, WA 98032
Adjustable
Skyhook Anchor
Part #: 00342
Compliant with all OSHA 1910, OSHA 1926 Subpart M,
ANSI Z359.1-2007, and ANSI A10.32-2004 regulations.
Prior to use, read and understand all instructions provided
with equipment at time of shipment from manufacturer.
Date of manufacture:
Materials: Powder-coated steel
and Zinc-plated steel.
Capacity range: 130-310 lbs.
(including all equipment)
Structure must withstand MINIMUM load of 5,000 lbs.
All fasteners, equipment, and connections must be selected and deemed compatible
with the Skyhook Anchor by a Competent Person. All fastener holes MUST be filled.
Avoid contact with sharp and abrasive edges and surfaces.
Avoid contact with all hazards, including, but not limited to,
electrical shock, corrosive substances, and excessive heat.
Compatible roof pitch:
flat - 12/12.
Substrate strength requirements: Wood: 3/4” CDX plywood or better.
Metal: 20ga. or thicker. Concrete: 2000 p.s.i. minimum.
90050
(Rev. A)