Qualcraft CB Swivel Top System User Manual
Cb swivel top instructions
![background image](/manuals/357761/1/background.png)
CB SWIVEL TOP
INSTRUCTIONS
General Description: The Guardian CB SWIVEL TOP is a roof mounted fall protection
system designed for use on CB Series raised anchors. It allows workers free movement
while tied off to an approved and already installed CB Series raised anchor.
WARNING:
WARNING: Federal, State and Local standards and laws
must be followed at all times. Failure to do so may result
in serious injury or death.
INSTALLATION AND INSPECTION
1. Visually inspect the unit before installation:
a. CB Anchor
i. Assembly is free of damage including bends and welds.
b. CB SWIVEL TOP ANCHOR:
i. No physical damage to welds or pins.
2. WARNING: If the unit fails the visual inspection or test, do not use.
Return to Guardian for repair. DO NOT TRY TO REPAIR THE UNIT!
3. Attach the unit to a proper anchorage point which is in line with and
above the user (perpendicular to the edge). Never use an
The purchaser/user is solely responsible for attaching the Guardian CB SWIVEL TOP to
a proper point in the roof. The attachment point must meet all Federal, State and Local
regulations and OSHA (Fall Protection). The purchaser/user is also solely responsible
for obtaining and using a harness and connecting equipment, as well as enforcing safe
work practices when using this equipment.
1. Failure to install, use, and/or remove Guardian equipment in a safe and
responsible manner can result in serious injury or death.
2. Read and understand all instructions, warnings, cautions, notes, etc. regarding the
sage use of this safety equipment.
3. When installing, using and removing Guardian safety equipment, Federal, State and
Local Laws and Regulations must be followed. Consult OSHA and ANSI for more
information.
4. You must plan for and follow safe work practices for each installation and removal
of this equipment.
5. If you have any questions regarding the safe installation, use, or removal of the
equipment call Guardian at (800) 466-6385.