Questions & answers, Replacement parts, What eco uplight can be used for – Probuilt Professional Lighting ECO Uplight User Manual
Page 6

QUESTIONS & ANSWERS
1. How often should I replace the tube?
Uplight uses a T8 triphosphor tube with an extended life of 20,000 hours due to
the in-built high frequency technology. However, we only recommend
replacement of the tube after failure.
2. Is Uplight suitable for indoor or outdoor use?
Uplight’s fitted with a 110V 15A plug which is rated to IP44 and is suitable for
indoor and outdoor use (IP44 = protected against solid objects over 1mm and
water sprayed from all directions - limited ingress permitted).
3. How hot does the light lens get in operation? Low Wattage means low heat.
Uplight is tepid to touch even in continuous use. Alow ambient temperature
of 35°C is given out and must be noted for indoor use.
REPLACEMENT PARTS
1. Parts must only be replaced by an authorised repairer as special tools
are required.
2. Only genuine UPLIGHT spares should be used.
WHAT ECO UPLIGHT CAN BE USED FOR
Indoor Use
Plastering
Emergency lighting
Painting
Car body workshops
Domestic DIY
Internal refurbishment
PRODUCT SPECIFICATION
Rated Voltage 110V 50/60Hz
Mains input range 108-304 AC/DC
Operating Frequency 28-30 kHz
Temperature range -25ºC to 50ºC