Powermate P-WLE-1639 - Manual (Page 6)

Questions? Call Toll Free at 1-800-737-2112 Copyright © 2008 MAT Engine Technologies, LLC
Edger Specifications
• Save all instructions
Parts & Features
Unit Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 lb. (32kg)
Cutting Depths . . . . . . . . . . . . . . . . . . . 0-3.0 in. (0-76 mm)
Blade Diameter. . . . . . . . . . . . . . . . 9 in. (228 mm), 3 point
Gasoline Type . . . . . Regular Unleaded / 88 Octane (min.)
Gasoline Capacity . . . . . . . . . . . . . . . . . . . . . 3.5 qt. (3.3L)
Oil Type (API SG-SL) 10W-30 is recommended for all ser-
vice temperatures. See page 7 for additional information.
Oil Capacity . . . . . . . . . . . . . . . . . . . . . . . . . 19 oz (562 ml)
Spark Plug Model. . . . . . . . . . . . . . . . . . . . . . Torch F7RTC
1. Start Lever Lever on handle which allows the engine to
run. When lever is released, engine will stop.
2. Primer Bulb
Injects fuel mixture into the carburetor for
cold starting the engine.
3. Muffler
Location of engine exhaust.
4. Adjustable Rear Wheel Right rear wheel is adjustable to
level the edger when edging along a curb (curb-hopping).
5. Adjustable Front Wheels
Front wheels are adjustable from
side to side for balance. The front wheels can also adjust
down for curb-hopping.
6. Recoil Starter Handle
The engine is equipped with an
easy pull recoil starter.
7. Index Lever
Permits adjusting the cutting angle to 15
degrees, 0 degrees (vertical), or -15 degrees. To change
the angle, pull the index lever and rotate the quill assembly
to the desired angle.
8. Blade
Rotating cutting element.
9. Blade Guard Prevents stones and debris from being
thrown at the operator.
10. Spark Plug/Spark Plug Wire
Provides spark to ignite air/
fuel mixture. The Spark Plug Wire must be disconnected and
moved away from the Spark Plug when servicing the unit.
11. Air Filter
Removes debris and contaminates from in-
take air, allowing engine to run smoothly with low exhaust.
12. Depth Selector Plate, 13. Depth Control Lever,
14. Control Rod Used to control the edging depth of cut.
15. Flameout Wire Terminals Must be connected for the
Start Lever to function.
Spark Plug Gap . . . . . . . . . . . 0.028-0.031 in. (0.7-0.8 mm)
Engine Type . . . . . . . . . . . . . 4 Stroke, single cylinder, OHV
Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163cc
RPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000 RPM
Torque Rating. . . . . . 6.5 ft-lbs gross torque per SAE J1940
Bore Diam. x Stroke. . . . . . . . . . . . 2.7X1.8 in. (68X45 mm)
Intake Valve Clearance . 0.0032-0.0047 in.(0.08-0.12 mm)
Exhaust Valve Clearance . 0.0059-0.0079 in.(0.15-0.20mm)
Angle of Ignition . . . . . . . . . . . . . . . . . . . . . . . . 25 Degrees
5
Figure 1
FRONT VIEW
Rear View
7
3
10
1
6
2
4
5
9
8
13
12
14
11
15