Northstar Trailers SPORTSTAR II - Manual (Page 13)

TIGHTEN AND SECURE ALL BOLTS! After all side-rails and brackets are in their
proper positions, make sure to securely tighten all bolts, and make sure that all
cotter-pins are installed in the side-rail pins. Ensure that at least one leg of the
cotter-pin is bent to 90 degrees.
Note: the corner brackets run parallel to the front and rear of the trailer, and
store/carry the trailer ramps.
STEP 9: MOUNT TRAILER RAMPS
a. Mount the trailer ramps (5) on the front and rear corner brackets, and secure
the ramps to the brackets by sliding the ramp-pins through the eyeholes on
each end of the ramps.
b. Secure the ramps to the brackets by inserting the cotter-pins from the
retaining cables.
YOU ARE FINISHED! We hope that you enjoy your NORTHSTAR TRAILER. Please
contact us at 1-855-375-3088 or email
[email protected] if you have any
questions. Our business hours are Monday-Friday 9:00 a.m. to 5:00 p.m. MST.
TRAILER SPECIFICATIONS
Trailer Weight: 500 lb.s
Towing Capacity: 1,500 (GVWR)
Length (w/ tongue): 178”
Width: 73”
Tire Size: 13x175
Note: The dealer that sold you this trailer will ship you the trailer’s Certificate of
Origin. The certificate will arrive approximately two weeks after the trailer is
delivered.